Thanks for the reply. I tried a few other systems with success, so it is strange. No worries, though, there are other options. I bought a 3C589 card off
eBay, and then found I had a 3C562 as well as the several incompatible 100M cards. But I was able to get in through telnet and download the file.

Have a great day!
Steve

On Sunday December 30, 2018, Tim Grooms said to Steve Palm...

Hi Steve,

I have a Wimodem232 myself. I have always had problems with errors and timing out when calling Amiga boards, mine included. I have tried everything I could think of contacted the guy who makes them. He gave
a couple of suggestions but they didn't work for me. File transfers
work fine for people using an ethernet connection to call in, myself included so I am not sure what to do to fix the problem while using the Wimodem232. Sorry. Thanks for calling the board.

Tim

On Sunday December 30, 2018, Steve Palm said to Tim Grooms...

Hi!

This is probably not your problem, but wondering if you had any tips.

Trying to download on an Amiga 1200 with a WiModem232. I tried using
the Term program and JR-Comm. ZModem. I have handshaking turned on,
and I tried 19200 and 57600 baud rates.

I keep getting CRC errors.

I have downloaded using this setup, but I don't think from this
system. I will go try a few others and see what I run into.

Thanks for running the BBS!
Steve

--- Zeus BBS 1.5
* Origin: CIA AMIGA BBS - ciaamigabbs.dynu.net:6400 (1:19/38.0)

I tried all three on this system, including the various YModem versions I had, nothing worked, although they did work on another BBS. So it could be some strange mixture between my connection and how the remote telnet-BBS bridge is configured... I dunno. Not a huge problem I guess, just strange.

Thanks!
Steve

On Monday December 31, 2018, Joacim Melin said to Steve Palm...

Z-modem isn't built to run over TCP/IP. Try X-modem or Y-modem instead.
It *will* work with Z-modem but it will take tons of time.

--- Zeus BBS 1.5
* Origin: CIA AMIGA BBS - ciaamigabbs.dynu.net:6400 (1:19/38.0)

Hi Steve,

I'm using the same card in my 1200 to run the board and on my 600 to call in with from remote. Never seem to have any problems as long as it's an ethernet connection.

Glad you were able to get the file you needed. I'm going to put more files up one of these days as I get time.

Tim

On Tuesday January 01, 2019, Steve Palm said to Tim Grooms...

Thanks for the reply. I tried a few other systems with success, so it
is strange. No worries, though, there are other options. I bought a
3C589 card off eBay, and then found I had a 3C562 as well as the
several incompatible 100M cards. But I was able to get in through
telnet and download the file.

Have a great day!
Steve

--- Zeus BBS 1.5
* Origin: CIA AMIGA BBS - ciaamigabbs.dynu.net:6400 (1:19/38.0)

Hi!

This is probably not your problem, but wondering if you had any tips.

Trying to download on an Amiga 1200 with a WiModem232. I tried using the
Term program and JR-Comm. ZModem. I have handshaking turned on, and I
tried 19200 and 57600 baud rates.

I keep getting CRC errors.

I have downloaded using this setup, but I don't think from this system.
I will go try a few others and see what I run into.

Thanks for running the BBS!
Steve


--- Zeus BBS 1.5
* Origin: CIA AMIGA BBS - ciaamigabbs.dynu.net:6400 (1:19/38.0)

Hi Steve,

I have a Wimodem232 myself. I have always had problems with errors and timing out when calling Amiga boards, mine included. I have tried everything I could think of contacted the guy who makes them. He gave a couple of suggestions but
they didn't work for me. File transfers work fine for people using an ethernet connection to call in, myself included so I am not sure what to do to fix the problem while using the Wimodem232. Sorry.
Thanks for calling the board.

Tim

On Sunday December 30, 2018, Steve Palm said to Tim Grooms...

Hi!

This is probably not your problem, but wondering if you had any tips.

Trying to download on an Amiga 1200 with a WiModem232. I tried using
the Term program and JR-Comm. ZModem. I have handshaking turned on,
and I tried 19200 and 57600 baud rates.

I keep getting CRC errors.

I have downloaded using this setup, but I don't think from this system.
I will go try a few others and see what I run into.

Thanks for running the BBS!
Steve

--- Zeus BBS 1.5
* Origin: CIA AMIGA BBS - ciaamigabbs.dynu.net:6400 (1:19/38.0)

Z-modem isn't built to run over TCP/IP. Try X-modem or Y-modem instead. It *will* work with Z-modem but it will take tons of time.


--- NiKom v2.5.0dev
* Origin: Delta City (deltacity.se, Vallentuna, Sweden) (2:201/120.0)