Greetings All,Ok, so I am
using BinkD, husky and golded for a point off my Mystic BBS.
Everything I thought was working now except I have discovered that people
cant send my point netmail. I thought it was working because between my
point and my bbs it does, areafix etc. I have even sent a test email from bb sto point no problems. I have sent netmails from point to o
ther recipientsand they have received and replied, but I did
not receive them on eithersetup.Thoughts?
---Regards,Rick // Nit
ro
--- Mystic BBS v1.12 A46 2020/04/09 (Windows/64)
* Origin: Abacus BBS (1:340/202)

Hello Rick,

Greetings All,Ok, so I am
using BinkD, husky and golded for a point off my Mystic BBS.
Everything I thought was working now except I have discovered that
people cant send my point netmail. I thought it was working because between my point and my bbs it does, areafix etc. I have even sent a
test email from bb sto point no problems. I have sent
netmails from point to o ther recipientsand they have
received and replied, but I did not receive them on
eithersetup.Thoughts? ---Re
gards,Rick // Nit ro

That's a bit hard to read but I think you are having trouble getting netmail from your node to your point?

I just replied to your point .1, I sent the reply to your node 340/202.

Have a look in your nodes insecure inbound perhaps? I suspect there may be a few .pkt's in there that contaon netmail messages for your point.

Ttyl :-),
Al

--- GoldED+/LNX
* Origin: The Rusty MailBox - Penticton, BC Canada (1:153/757)

Re: Netmail question
By: Alan Ianson to Rick Smith on Mon Apr 20 2020 11:03:58

That's a bit hard to read

a little hard? your reply was in red because his signature didn't reset the colors afterward... plus the message header was stomped all over :(

https://sestar.synchro.net/temp/20200420-ANSI-in-fidonet-ugh-01.jpg


)\/(ark
--- SBBSecho 3.10-Linux
* Origin: SouthEast Star Mail HUB - SESTAR (1:3634/12)

Hello mark,

That's a bit hard to read

a little hard? your reply was in red because his signature didn't
reset the colors afterward... plus the message header was stomped all
over :(

Yep, I don't know why that happens but Mystic users don't try to post using ansi and don't get an opportunity to turn it off.

I don't think they know when this happens. It happens when they edit or forward
a message with ansi or pipe codes and mystic goes into ansi mode without their knowlwdge.

Ttyl :-),
Al

--- GoldED+/LNX
* Origin: The Rusty MailBox - Penticton, BC Canada (1:153/757)

On 2020 Apr 20 13:47:22, you wrote to me:

That's a bit hard to read

a little hard? your reply was in red because his signature didn't
reset the colors afterward... plus the message header was stomped all
over :(

Yep, I don't know why that happens but Mystic users don't try to post

using

ansi and don't get an opportunity to turn it off.

the one you replied to wa san original... no ANSI in an existing message to get
in the way... the worst part is the homing of the cursor to the top left corner
of the screen and then just writing over whatever is there...

I don't think they know when this happens. It happens when they edit
or forward a message with ansi or pipe codes and mystic goes into ansi mode without their knowlwdge.

whatever it is, it is annoying and painful to deal with... i had to start over several times when i replied to one in the BINKD echo because things were just whack... i dunno and my painfully pinched nerves in my neck are making me quite
the grumpy fellow
)\/(ark

"The soul of a small kitten in the body of a mighty dragon. Look on my majesty,
ye mighty, and despair! Or bring me catnip. Your choice. Oooh, a shiny thing!" ... The moderator is a stupid, idiotic, good for no#@^%$@&#%# <NO CARRIER>
---
* Origin: (1:3634/12.73)

Re: Netmail question
By: Alan Ianson to mark lewis on Mon Apr 20 2020 01:47 pm

Yep, I don't know why that happens but Mystic users don't try to post using ansi and don't get an opportunity to turn it off.

From memory, it is a setting on each echoarea - but I could be wrong.
...ëîåã



... HANGOVER: the wrath of grapes.
--- SBBSecho 3.10-Linux
* Origin: I'm playing with ANSI+videotex - wanna play too? (3:633/509)

On 21 Apr 2020, Deon George said the following...

From memory, it is a setting on each echoarea - but I could be wrong. ...ëîåã

That's correct. I keep ansi turned off in most of the message bases here for that reason. Only on in the ones where I know for sure it's allowed.

-=>Richard Miles<=-
-=>Captain Obvious<=-
-=>bbs.shadowscope.com<=-

--- Mystic BBS v1.12 A46 2020/04/17 (Windows/32)
* Origin: Shadowscope BBS | shadowscope.noip.us | Temple, GA (1:3634/24)

Re: Netmail question
By: Richard Miles to Deon George on Mon Apr 20 2020 10:25 pm

On 21 Apr 2020, Deon George said the following...

From memory, it is a setting on each echoarea - but I could be wrong. ...ëîåã

That's correct. I keep ansi turned off in most of the message bases here for that reason. Only on in the ones where I know for sure it's allowed.

And isn't that what pipe-codes are for? So they can be easily stripped-out or ignored when viewed or exported to systems that don't support them?

digital man

This Is Spinal Tap quote #12:
Nigel Tufnel: Well, I don't know - wh-wh-... what're the hours?
Norco, CA WX: 58.5øF, 78.0% humidity, 4 mph E wind, 0.00 inches rain/24hrs
--- SBBSecho 3.10-Linux
* Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)

Re: Netmail question
By: Richard Miles to Deon George on Mon Apr 20 2020 22:25:50

From memory, it is a setting on each echoarea - but I could be wrong.

That's correct. I keep ansi turned off in most of the message bases
here for that reason. Only on in the ones where I know for sure it's

allowed.

one of the problems i'm seeing here is that even though it is specifically switched off (manually) in all 200+ fidonet groups/areas here, it is still being displayed instead of being stripped for some reason... i need to update to the latest code, though.

)\/(ark
--- SBBSecho 3.10-Linux
* Origin: SouthEast Star Mail HUB - SESTAR (1:3634/12)

Hello Rick!

19 Apr 20, Rick Smith wrote to All:

Greetings All,Ok, so I am
using BinkD, husky and golded for a point off my Mystic BBS.
Everything I thought was working now

No. It's broken finally.

received and replied, but I did not receive them on
eithersetup.Thoughts?
---Re
gards,Rick // Nit ro
--- Mystic BBS v1.12 A46 2020/04/09 (Windows/64)

Your system is producing unreadable mail with a lot of useless characters.

Maybe you should try a standalone node system with binkd, husky and golded first.

Regards

Kai

--- GoldED+/LNX 1.1.4.7
* Origin: Monobox (2:240/77)